Voxell
8. VOXELL - CONFIGURING
VOXELL_UMTS_installation_revG_en.doc
43
8. VOXELL - CONFIGURING
VOXELL can be configured with the OAM program, which is supplied
on the CD or floppy disk.
The OAM program allows you to configure the GSM/GPRS/3G
module and the FxO and FxS phone interfaces (parameter setting)
-
IN
, input: if the module has activated this option, the calls to
the GSM/GPRS/3G module will be sent through the FxS or FxO
interface, in this mode the calls will be rejected by the GSM/3G
module.
-
OUT
, output - if the module has activated this option, the user
can initiate a call to the mobile network through the GSM/GPRS/3G
module
-
CLIR
– when this feature is activated, the ID number will not be
send over the mobile network.
-
„
Change PIN code”
: if this feature is activated, the equipment
generates a new PIN code, known only by the user. When VOXELL
equipment starts, after the old PIN code is insert the equipment will
generate a new code. In this way the user makes sure that the SIM
card can be used by others equipments.
The details regarding the configuring of 3G module can be found in
the OAM manual of the VOXELL product.
