Voxell
VOXELL - INSTALLATION
VOXELL_UMTS_installation_revG_en.doc
12
4. Insert the holder with
SIM card back into the
slot!
Note 1: The described operation must be achieved also when you
want to change the existing SIM card with a new SIM card.
Note 2: When the VOXELL equipment is started and includes a SIM
card that has the „PIN CODE REQUEST” option enable, VOXELL
sends to SIM the code that was stored. If this code is different from
the SIM code VOXELL switches into ” mode of waiting for PIN code”
from telephone interface. Now you may dial the code from DTMF
phone connected to the equipment or using the O.A.M.
software.
As an alternative VOXELL can be connected to a trunk of the
exchange and the PIN code will be entered from an office phone. First
dial the required code for forced engaging of that trunk and then enter
the SIM code.
If the PIN code was sent incorrectly for three times to SIM, the SIM
becomes inactive. For unlocking you must use the PUK code.
VOXELL requires the inserting of PIN code or PUK through LED
blinking, labeled with
„
”,
and the tonalities that you hear in receiver.
