Installation and Configuration
Shutting Down the System
69
VENICE S | User Manual | 2906.1345.02 - 02
Rohde & Schwarz GmbH & Co. KG
Shutting Down the System
There are several possibilities to shut down the system. It
depends on whether the operating system is already loaded,
frozen or not completely loaded. Please act accordingly.
Shut Down While Running
Perform the following steps:
•
Enter
poweroff
in the command line of the VENICE S.
The operating system will save your personal settings and
once it has ended, the system will turn off.
System is shut down.
Shut Down With Operating System Frozen or Not
Completely Loaded
If the operating system is not responding anymore or not
completely loaded, do as follows:
Perform the following steps:
•
Shut down the system by pressing the power switch lengthly
until the system turns off.
The system is shut down.
Re-start
It takes a while to safely erase all memory banks
of the system.
After a shut-down wait at least ten seconds before
starting the system again.
Corrupted Data
Shutting down the system while frozen or not
completely loaded may lead to corrupted system
data.
Use this procedure only if absolutely necessary.