Product Description
Pin Assignment
54
VENICE S | User Manual | 2906.1345.02 - 02
Rohde & Schwarz GmbH & Co. KG
RJ45 Connector
The RJ45 connector enables you to use Master/Slave control.
For more information see chapter “Out- or Input of Master/Slave
Control Signals” on page 43.
RJ45 connector, serial RS-422 interface (4) (external view on device
[female])
RJ45
Slave Mode (default)
Master Mode
Pin No.
Signal
Signal
1
GND
GND
2
reserved
reserved
3
RX (+)
TX (+)
4
TX (-)
RX (-)
5
TX (+)
RX (+)
6
RX (-)
TX (-)
7
not connected
not connected
8
not connected
not connected
If you want to manufacture a direct line VDCP cable
please note the slave mode assignment above. Your
VDCP cable should connect the automation’s TX+/-
pins with the RX+/- pins of the VENICE S and vice ver-
sa (
+
to
+
and
-
to
-
and of course GND/ground).
8
1