Maintenance
Replacing a Cooling Fan Assembly
103
VENICE S | User Manual | 2906.1345.02 - 02
Rohde & Schwarz GmbH & Co. KG
Replacing a Cooling Fan Assembly
Requirements:
Follow the safety guidelines listed in chapter “Safety Instructions”
on page 90 and chapter “Safety” on page 9.
If installed, remove the front plate as described in chapter “Remo-
ving the Front Plate” on page 92.
If applicable, remove the system from the rack.
Remove the system cover as described in chapter “Removing the
System Cover” on page 94.
Perform the following steps:
1.
Unlock the cooling fan assembly from the chassis by lifting
the release levers.
2.
Lift the cooling fan assembly out of the chassis.
3.
Align the slots on the cooling fan assembly with the guide
pins on the chassis.
4.
Slide the new cooling fan assembly into the chassis.