manualshive.com logo in svg

Rohde & Schwarz TSMA6 Series, Getting Started

Share
Download
Rohde & Schwarz TSMA6 Series Getting Started Download Page 17

Preparing for Use

R&S

®

TSMA6

17

Getting Started 4900.8040.02 ─ 06

Figure 4-6: Connected R&S

 

TSMA6 and R&S

 

TSMA6-BP

1 = Move R&S

 

TSMA6 vertically

2 = Move R&S

 

TSMA6 horizontally

3 = Power Connection established

The power-up behavior after connecting the R&S

 

TSMA6-BP Battery Pack

Unit (including charged batteries or connected to an external DC power sup-
ply) with the R&S

 

TSMA6 depends on the system settings on the

R&S

 

TSMA6.

● Auto Power On

The R&S

 

TSMA6 starts automatically when power is applied at the DC IN

connector of the R&S

 

TSMA6 or at the DC IN connector of a connected

R&S

 

TSMA6 Battery Pack.

● Remember Last State

The R&S

 

TSMA6 remembers the last state before the DC power was

removed

● Startup Delay

"Auto Power On" after a configurable time delay

● Auto Power Off

"Auto Power Off" after a configurable time delay if the R&S

 

TSMA6 is con-

nected to a R&S

 

TSMA6 Battery Pack.

Connecting Power Supply

Summary of Contents for TSMA6 Series
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands