Rohde & Schwarz SMM100A, User Manual

Page: 795 / 1088

Remote control commands
R&S
®
SMM100A
795 User Manual 1179.1341.02 ─ 05
[:SOURce<hw>]:BB:DM:DLISt:DATA:APPend <Bits>
Appends the bit data onto the end of the existing data in the selected data list. Existing
content in the data list is not overwritten. Hence, you can create long data lists piece-
meal.
The command cannot be used with an empty data list, like for example data lists that
has just been created. Use the command
[:SOURce<hw>]:BB:DM:DLISt:DATA
first
and enter modulation data in the list.
*RST
has no effect on data lists.
Setting parameters:
<Bits> 0 | 1 {,0 | 1 } | block data
Example: See Example "Performing general tasks" on page 770
Usage: Setting only
[:SOURce<hw>]:BB:DM:CLISt:TAG?
[:SOURce<hw>]:BB:DM:DLISt:TAG?
Queries the content of the specified tag in the selected file.
Return values:
<Tag> <control list>,<tag name>
Refer to
Chapter 4.6.5, "Tags for waveforms, data and control
lists" , on page 177 for description of the available tag formats.
Example: SOURce1:BB:DM:DLISt:TAG? "D_list","date"
Queries the
Date
tag in list
D_list
.
Usage: Query only
13.16.4.3 SOURce:BB:ARBitrary subsystem
This section list the commands of the
SOURce:BB:ARBitrary
subsystem.
Required options
See Chapter 4.6.1, "Required options" , on page 147.
The commands are grouped in the following sections:
● Programming examples ........................................................................................ 796
● General commands ...............................................................................................804
● Test signal commands ...........................................................................................805
● Waveform commands ........................................................................................... 809
● Multi-segment commands .....................................................................................813
● Multi-segment sequencing commands ..................................................................818
● Multi-carrier commands .........................................................................................821
● Notch filter commands .......................................................................................... 833
SOURce subsystem