Network operation and remote control
R&S
®
SMM100A
579
User Manual 1179.1341.02 ─ 05
12
Network operation and remote control
As an alternative to the interactive operation directly at the instrument, you can operate
the R&S
SMM100A also from a remote location.
The various interfaces provide flexible access to the instrument, such as
remote con-
trol
,
remote operation
or
remote file access
. These remote access modes are funda-
mentally different, although they are often considered interchangeable, as described in
Overview of remote access modes
.
shows the possibilities of the physical connection (interfaces) for remote
access.
The following descriptions provide information required for operating the
R&S
SMM100A remotely. The information applies to all applications and operating
modes supported by the instrument. Definitions specified in the SCPI standard are not
provided.
For basic knowledge on remote control operation and additional information, see the
following documents, available on the Rohde
&
Schwarz website:
●
●
1GP72: Connectivity of Rohde&Schwarz Signal Generators
●
1MA208: Fast Remote Instrument Control with HiSLIP
Figure 12-1: Supported remote connections
Overview of remote access modes
.......................................................................580
Remote control interfaces and protocols
...............................................................581
Remote control programs and libraries
.................................................................586
........................................................................................ 589
........................................................................................598
Connecting the instrument to the network (LAN)
.................................................. 619
..............................................................622