Rohde & Schwarz SMM100A User Manual Download

Page: 581 / 1088

Network operation and remote control

R&S

SMM100A

581

User Manual 1179.1341.02 ─ 05

Remote device

VNC client

Requirements

Characteristics

●

Web browser with HTML5

Web sockets

must be supported.

Slower than the other modes.

No additional installation or acti-
vation required.

No security concern.

Smart device

(Tablet/ smartphone)

●

Dedicated client App

App

must be installed.

Fast, supports several options like
full screen mode or auto-login.

●

Web browser with HTML5

Web sockets

must be supported.

Support of QR code scanning

Slower than a dedicated App.

Remote file access (FTP, SAMBA/SMB)

●

A remote client accesses the instrument's file system, using the protocols FTP (file
transfer protocol) and SAMBA/SMB (server message block).

●

The protocols enable you to transfer files from or to the instrument and to get direct
access to its file sharing directory

How to:

Chapter 10.9, "How to transfer files from and to the instrument"

on page 509.

"Activating SMB version 1.0/2.0 client and server"

on page 575

12.2

Remote control interfaces and protocols

The instrument supports various interfaces for remote control.

Table 12-2

gives an

overview on the connectivity:

Table 12-2: Remote control interfaces and protocols

Interface

Protocols, VISA

address string and library

Remarks

Local area network
(LAN)

●

HiSLIP

High-Speed LAN Instrument Protocol

(IVI-6.1)

TCPIP::host address::hislip0[::INSTR]

VISA

●

VXI-11

TCPIP::host address[::
LAN device name][::INSTR]

VISA

●

Socket communication

(Raw Ethernet, simple

Telnet)

TCPIP::host address[::
LAN device name]::<port>::SOCKET

VISA or socket controller

The LAN connector is at the rear panel of the
instrument.

The interface is based on TCP/IP, see

Chap-

ter 12.2.1, "LAN interface"

on page 582 for

details on the address information.

USB

●

USBTMC

USB::<vendor ID>::<product ID>::
<serial number>[::INSTR]

VISA

The USB Device connector is at the rear panel
of the instrument.

For a description of the interface, see

Chap-

ter 12.2.2, "USB interface"

on page 584

Remote control interfaces and protocols

Summary of Contents for SMM100A

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SMM100A

Reviews:

Related manuals for SMM100A

Brands by name

Popular brands

Rohde & Schwarz SMM100A, User Manual

Search results

Summary of Contents for SMM100A

Reviews:

Related manuals for SMM100A

Brands by name

Popular brands