Rohde & Schwarz SMM100A, User Manual

Page: 523 / 1088

General instrument functions
R&S
®
SMM100A
523 User Manual 1179.1341.02 ─ 05
However, you can turn off this function to reduce settling times when the instrument is
remote controlled.
We recommend that you switch off the display update for optimum sweep performance
with short dwell times and for fast settling times.
Consider that in this case the displayed values can differ from the operated values.
In detail described in the following paragraphs, you can:
●
Set display and keyboard language, see Chapter 11.1.1, "Display and keyboard
settings" , on page 523
●
Customize the GUI appearance, see:
–
Dialog snapshots
– Chapter 11.1.2, "Appearance settings" , on page 524
●
Set date and time for the system clock, see Chapter 16.3.1, "Date and time" ,
on page 1014
●
Configure and activate a Screen Saver
●
Deactivate display update to improve performance, see Chapter 11.1.3, "Display
update settings" , on page 525
●
Determine the state of the RF signal, and the level display in the status bar when
you turn on the R&S
SMM100A, see Chapter 11.1.4, "Defining the RF signal state
on power on" , on page 525.
11.1.1 Display and keyboard settings
Access:
1. Select "System Config > Setup > User Interface > Display/Keyboard > Display".
2. Select "Display/Keyboard > USB Keyboard".
In the "Display/Keyboard" dialog, you can change regional and language options
for the GUI and an external keyboard, and define the screen saver settings.
Customizing the user interface