Multi-instrument setups
R&S
®
SMM100A
472
User Manual 1179.1341.02 ─ 05
The remote commands required to define these settings are described in
ter 13.16.2, "SOURce:BBIN subsystem"
Settings:
..............................................................................................473
9.5.1
General settings
Access:
► Select "BB Input > Digital I/Q In > Baseband Input Settings".
Settings:
State
Enables the feeding of the selected external digital signals into the baseband.
Remote command:
Connector
Defines the connector used as an external signal source.
Available are all digital input connectors, as defined with "System Configuration >
External RF and I/Q > Direction > Input" (see
).
Remote command:
[:SOURce<hw>]:BBIN:DIGital:SOURce
Interface
Sets which of the digital interfaces is used, the Dig I/Q or the HS Dig I/Q.
Remote command:
[:SOURce<hw>]:BBIN:DIGital:INTerface
Digital baseband input settings