Rohde & Schwarz SMM100A, User Manual

Page: 455 / 1088

Multi-instrument setups
R&S
®
SMM100A
455 User Manual 1179.1341.02 ─ 05
9.3.5 Further information
For description of the settings related to connection establishment, see:
●
Chapter 9.4.2, "External RF and I/Q settings" , on page 456
●
Chapter 9.4.1, "I/Q stream mapper settings" , on page 455
For information on the manual and remote control operation of the external instru-
ments, see the documentation of the particular instrument:
●
For R&S SZU, see the SZU100A Getting Started
●
For R&S SGT, see the SGT100A User Manual
9.4 System configuration settings
The settings in this dialog comprise the I/Q mapping and the processing of the gener-
ated I/Q streams. Form this dialog, you can control and configure the connections to
instruments connected to the RF and I/Q connectors.
Required options
The equipment layout includes:
●
Base unit
●
Option differential analog I/Q outputs R&S SMM-K17
●
Optional, option frequency R&S SMM-B1006
For description of the "Multi-Instrument" settings, see Chapter 9.2.1.1, "Multi-instru-
ment settings" , on page 442.
This section described the following settings:
● I/Q stream mapper settings ...................................................................................455
● External RF and I/Q settings .................................................................................456
● Overview ............................................................................................................... 469
9.4.1 I/Q stream mapper settings
Access:
► In the block diagram, select "I/Q Stream Mapper".
System configuration settings