Multi-instrument setups
R&S
®
SMM100A
469
User Manual 1179.1341.02 ─ 05
Show connector
Access:
1. Select "Taskbar > System Config > System Configuration > External RF and I/Q".
2. Navigate to the required connector.
Select "External Instruments > Config ...".
3. In the "<Dig. Conn. Name>: External Instrument Configuration" dialog, select
"Show Connector".
The dialog displays the location of the selected connector.
The "Show Connector" function triggers the instrument to identify the connector on
the rear panel. The LED next to the selected connector blinks.
9.4.3
Overview
Access:
► To display an
interactive
overview diagram of the current configuration, select "Sys-
tem Configuration > Overview".
System configuration settings