Instrument control
R&S
®
SGT100A
59
Getting Started 1419.4576.02 ─ 10
Example:
PCIe::0x162f::0x1336::100021::INSTR
0x162f is the vendor ID for Rohde
&
Schwarz.
0x1336 is the product ID for the R&S
SGT.
100021 is the serial number of the particular instrument.
Using the PCIe interface for remote control of the instrument requires exten-
ded knowledge and is described in section "Advanced Remote Control via
PCIe" in the user manual.
7.2.1.4
GPIB interface (IEC/IEEE bus interface)
The R&S
SGT is not equipped with an IEC/IEEE bus interface.
To be able to control the instrument via the GPIB bus:
1. Connect a GPIB-to-LAN or a GPIB-to-USB adapter to the instrument.
2. Use a GPIB bus cable to connect the instrument and the controller.
3. Provide the GPIB bus card, the card drivers and the program libraries for the
programming language in the controller.
4. In the "SGMA-GUI > Setup > Instruments > instrument name > Remote Con-
trol", set the "GPIB Address".
5. If the controller has several GPIB bus cards, define the used "Board Number".
GPIB address
The controller must address the instrument with the GPIB bus channel. GPIB pro-
vides channel addresses from 0 to 30.
The GPIB resource string is
GPIB::<address>[::INSTR]
, where:
●
GPIB
denotes the used interface.
●
<address>
indicates the used channel.
●
[::INSTR]
indicates the instrument resource class (optional).
Note:
If the VISA implementation supports the GPIB interface, you can optionally
define the VISA instrument control resource (INSTR). It is used to define the
Network operation and remote control
