Putting into Operation
R&S
®
RT-ZC20
20
User Manual 1409.7814.02 ─ 02
4. Press the opening lever until the UNLOCK indication disappears, and check
that the sensor head is properly closed.
If the sensor head is not properly closed, accurate measurement is not possi-
ble.
The current consumption of clamp-on probes depends on the current to be
measured. Confirm that the total current consumption of the probes does
not exceed the rated output current of the R&S
RT-ZA13 probe power sup-
ply.
Fig. 3-8: Current consumption* vs. current to be measured (typical)
*The sum total of a positive and negative current consumption
Connecting the Probe to the DUT
