Putting into Operation
R&S
®
RT-ZC20
16
User Manual 1409.7814.02 ─ 02
3.2.2
Connecting to R&S RTM
1. Connect the output connector of the R&S
RT-ZC20 to one of the BNC input
connectors of the oscilloscope, e.g. to CH1 input. Turn the collar until it clicks,
and check that it is locked securely.
Fig. 3-3: Front panel of RTM
Fig. 3-4: Oscilloscope inputs
2. In the VERTICAL section on the front panel, press the CH1 key.
3. On the first page of the "Channels" menu, set:
● Coupling: "DC"
● Termination: "1
MΩ"
Press "More".
Connecting the Probe to R&S Oscilloscopes
