Instrument Tour
R&S
®
NGP800
19
Getting Started 5601.5603.02 ─ 05
For 64 V models, each output is capable to source 200 W of power at 0 V to 64 V
and maximum current of 10A.
Chassis ground terminal (5)
A 4 mm socket is provided for the user to connect to earth ground through the
instrument ground/chassis.
Standby button (6)
The [Power] key toggles the instrument between standby state and normal state.
In standby state, the key is illuminated in red and the instrument internal circuits
are operated in powered down state. In normal state, all the internal modules are
powered up and the instrument will startup to operate normally. The LED illumina-
tion is turned off in this state.
USB connector (7)
USB Type-A connector is provided for connecting a USB flash drive to perform
software update, store logging data or screen captures. It can also be used for an
external USB mouse connector.
Menu control keys (8)
The menu control keys allow you to access the home window, main menu window
and user button key in the instrument.
For a detailed description on menu control keys, see section "Menu Controls" in
the User Manual.
4.1.2
Rear Panel
shows the rear panel of the R&S
NGP800 power supply with its con-
nectors.
Overview of Controls
