Instrument Tour
R&S
®
NGP800
20
Getting Started 5601.5603.02 ─ 05
Figure 4-2: Rear panel of R&S
NGP800 power supply
9 = AC inlet with integrated 2-pole rocker switch
10 = Optional IEEE-488 (GPIB) interface
11 = Ground terminal
12 = Kensington lock
13 = Channel 3 and 4 rear panel connector (for NGP804, NGP814 and NGP824 models only)
14 = Channel 1 and 2 rear panel connector
15 = Analog input and digital I/O connector
16 = USB-B connector (device)
17 = Ethernet (LAN) connector
AC inlet with integrated 2-pole rocker switch (9)
Main supply cable
Use only the power cable that was supplied with the instrument. Using other
types, which might have inadequate rating can cause overheating of the
power cable, resulting in fire.
The power cable provides the earth ground connection through the third
ground conductor. Operate the instrument only on authorized safety sockets
which provide earth connection.
The power cable must be plugged in before signal circuits can be connected.
Never use the product if the power cable is damaged.
The built-in 2-pole rocker switch is the main power switch of the instrument which
connects/disconnects it from the AC supply.
Overview of Controls
