Instrument Tour
R&S
®
IQW
19
Getting Started 1178.6027.02 ─ 02
TRIG 1 / 2
Two BNC connectors for connecting external triggers.
Display port
Not supported.
DVI
Not supported.
LAN
An 8-pin RJ-45 connector to integrate the I/Q Wideband Recorder into a Local
Area Network (LAN), e.g. for remote control or for control of an R&S Signal Gen-
erator. The pin assignment of the RF-45 connector supports category 6 / 7
UTP/STP (Unshielded/Shielded Twisted Pair) cables.
USB 3.0 connector (2x)
The two USB 3.0 ports can be used for connecting external storage devices or
data sticks.
USB 2.0 connector (2x)
The two USB 2.0 ports can be used for connecting external devices as keyboard,
mouse or other devices.
USB Device
Not supported.
Mains connector and switch
The mains connector and power switch is located in the lower part on the left of
the rear panel.
Dig. IQ In/Out
Input and output connector for digital signals. Currently not supported.
Dig. IQ Out
Output connector for replay of digital signals. Currently not supported.
Rear Panel Description
