Preparing for Use
R&S
®
IQW
12
Getting Started 1178.6027.02 ─ 02
4.4.1
Connecting a Mouse
A USB mouse can be connected to one of the Universal Serial Bus (USB) con-
nectors on the front panel or on the rear panel.
The mouse is detected automatically when it is connected. It is safe to connect or
disconnect the mouse while the R&S IQW is in idle state.
Risk of data loss
Do not connect or disconnect the mouse while data is being recorded or
replayed.
4.4.2
Connecting a Keyboard
A keyboard can be connected to one of the Universal Serial Bus (USB) connec-
tors on the front panel or on the rear panel.
The keyboard is detected automatically when it is connected. The default input
language is English - US. It is safe to connect or disconnect the external key-
board while the R&S IQW is in idle state.
Risk of data loss
Do not connect or disconnect the keyboard while data is being recorded or
replayed.
4.4.3
Connecting a LAN Cable
Connect a CAT6 or CAT7 RJ-45 (LAN, Ethernet) cable to the LAN port on the
rear panel of the R&S IQW. See also
Chapter 4.2, "EMI Suppression"
,
on page 10.
Connecting External Devices
