Instrument tour
R&S
®
HMP Series
35
Getting Started 1178.6791.02 ─ 03
Rear panel connector
Rear panel output connector for connecting the R&S
HMP in 19‘‘ rack systems.
Depending on the instrument model, the instrument provides up to two 8-pin con-
nector blocks. A connector block covers four lines for voltage, current sense and
trigger signals for each channel.
5.2.2
AC power supply
AC supply with fuse holder
Mains power supply with fuse holder and IEC socket.
●
Fuse holder
Socket for the fuse securing the source voltage. Depending on the power sup-
ply system, the corresponding fuse must be plugged before connecting to
power.
See
●
IEC socket
Power supply connector for connecting the R&S
HMP to the mains.
Chapter 4.7, "Connecting to power"
AC power supply voltage selector switch
Switch for selecting the line voltage 115
V or 230
V.
See
"To set the supplied mains voltage"
Rear panel tour
