Rohde & Schwarz ESRP Series, User Manual

Page: 654 / 1094

Remote Control
R&S
®
ESRP
651 User Manual 1175.7445.02 ─ 08
Manual operation: See "Symbols (On Off)" on page 171
MMEMory:STORe:FINal <FileName>
This command exports the contents of the final measurement peak list to a file in ASCII
format.
Parameters:
<FileName> String containg the file name. The extension of the file is *.dat.
Example: :MMEM:STOR:FIN 'A:\TEST.DAT'
Usage: Event
Manual operation: See "Peak List Export" on page 171
MMEMory:STORe:PEAKlist <FileName>
This command exports the contents of a peak list to a file in ASCII format.
Parameters:
<FileName> String containg the file name. The extension of the file is *.dat.
Example: MMEM:STOR:PEAK 'D:\TEST.DAT'
Manual operation: See "Peak List Export" on page 171
11.4.6.5 Trace Configuration
Commands useful to configure traces and final measurements described elsewhere:
●
[SENSe:]FMEasurement:AUTO
on page 612
●
[SENSe:]FMEasurement:TIME
on page 612
●
[SENSe:]DETector<t>:FMEasurement
on page 611
[SENSe:][WINDow:]DETector<trace>[:FUNCtion]
.............................................................. 651
DISPlay[:WINDow<n>]:TRACe<t>:MODE
.........................................................................652
[SENSe:][WINDow:]DETector<trace>[:FUNCtion] <Detector>
This command selects the detector for the scan.
Suffix:
<trace>
.
1...6
Selects the trace.
Parameters:
<Detector> NEGative | POSitive | RMS | AVERage | QPEak | CAVerage |
CRMS
*RST:
APEak
Example: DET RMS
Selects the RMS detector.
Remote Commands in Receiver Mode