Rohde & Schwarz ESRP Series, User Manual

Page: 178 / 1094

Receiver Mode
R&S
®
ESRP
175 User Manual 1175.7445.02 ─ 08
with a special option, model or (measurement) mode, this information is provided in the
corresponding softkey description.
Trace 1 - 6 ................................................................................................................... 175
More Traces ................................................................................................................ 175
Copy Trace ..................................................................................................................175
Trace Wizard ............................................................................................................... 175
ASCII Trace Export ..................................................................................................... 175
Decim Sep ...................................................................................................................176
Trace 1 - 6
Opens a submenu to select the trace mode and detector (for both scan and final mea-
surement).
For more information see Chapter 5.2.2, "Detectors" , on page 143 and Chapter 5.2.3,
"Trace Modes" , on page 147.
Note: When you select detector type "None" for the final measurement, the
R&S ESRP ignores peaks found on the corresponding trace during the final measure-
ment.
Remote command:
Selecting the trace mode:
DISPlay[:WINDow<n>]:TRACe<t>:MODE
on page 652
Selecting the detector for the scan:
[SENSe:][WINDow:]DETector<trace>[:FUNCtion]
on page 821
Selecting the detector for the final measurement:
[SENSe:]DETector<t>:FMEasurement
on page 611
More Traces
Opens a submenu to select one of the traces not currently displayed in the main menu.
Copy Trace
Opens an edit dialog box to enter the number of the trace memory in which the cur-
rently selected trace will be copied.
Remote command:
TRACe<n>:COPY
on page 822
Trace Wizard
Opens the "Trace Wizard" dialog box.
For more information see Chapter 5.3.7.5, "Trace / Final Meas" , on page 171.
ASCII Trace Export
Opens the "ASCII Trace Export Name" dialog box and saves the active trace in ASCII
format to the specified file and directory.
Tip : You can export a single trace ("ASCII Trace Export Trace (x)" softkey) or all traces
at the same time ("ASCII Trace Export All Traces"). When you use single trace export,
the R&S
ESRP exports the currently selected trace (indicated by the softkey label).
Note that the exported ASCII file has a slightly different structure compared to a single
trace export.
Common Analysis Functions