6. Available Power Sources
•
4 x AA batteries
•
USB Power Cord, for oscilloscopes which offer USB
connector.
The supplied voltage must be less than 12 V and greater than 4.5 V, otherwise the
probe could be damaged or can’t be operated properly.
Polarity is “+” inside and “–” outside. For wrong polarity a built-in circuit protects the
probe, no danger or damage will occur.
When the voltage of the cells become too low, the power indicator on the front panel will
flicker
.
7. Accessories supplied
•
Grabber red and black
•
Alligator clip red and black
•
USB power cord
•
Trimming tool
•
Instruction manual
•
Certificate of calibration
