Remote Commands
R&S
®
Spectrum Rider FPH
338
User Manual 1321.1011.02 ─ 11
Example:
CALC:MATH2:COPY:MEM
TRAC:MEM? TRACE2
Copy trace2 to memory2 and read memory2 trace data.
Usage:
Query only
13.6.2.7
Using Markers
The following commands control the operation of marker, delta markers and marker
functions.
Markers and Delta Markers
The following commands are for setting and controlling markers and deltamarkers.
List of commands
CALCulate<1...2>:DELTamarker<1...6>[:STATe]
................................................................ 338
CALCulate<1...2>:DELTamarker<1...6>:AOFF
.................................................................. 339
CALCulate<1...2>:DELTamarker<1...6>:MAXimum[:PEAK]
.................................................339
CALCulate<1...2>:DELTamarker<1...6>:MAXimum:NEXT
...................................................339
CALCulate<1...2>:DELTamarker<1...6>:MINimum[:PEAK]
..................................................340
CALCulate<1...2>:DELTamarker<1...6>:X
.........................................................................340
CALCulate<1...2>:DELTamarker<1...6>:X:RELative
...........................................................340
CALCulate<1...2>:DELTamarker<1...6>:Y?
....................................................................... 341
CALCulate<1...2>:MARKer<1...6>[:STATe]
....................................................................... 341
CALCulate<1...2>:MARKer<1...6>:AOFF
..........................................................................342
CALCulate<1...2>:MARKer<1...6>:FREQuency:MODE
...................................................... 342
CALCulate<1...2>:MARKer<1...6>:FUNCtion:CENTer
........................................................342
CALCulate<1...2>:MARKer<1...6>:FUNCtion:REFerence
...................................................343
CALCulate<1...2>:MARKer<1...6>:MAXimum[:PEAK]
........................................................ 343
CALCulate<1...2>:MARKer<1...6>:MAXimum:NEXT
..........................................................343
CALCulate<1...2>:MARKer<1...6>:MINimum[:PEAK]
......................................................... 344
CALCulate<1...2>:MARKer<1...6>:X
................................................................................ 344
CALCulate<1...2>:MARKer<1...6>:X:SLIMits<1...2>[:STATe]
.............................................. 344
CALCulate<1...2>:MARKer<1...6>:X:SLIMits<1...2>:LEFT
..................................................345
CALCulate<1...2>:MARKer<1...6>:X:SLIMits<1...2>:RIGHt
.................................................345
CALCulate<1...2>:MARKer<1...6>:Y?
.............................................................................. 346
CALCulate<1...2>:DELTamarker<1...6>[:STATe]
<State>
This command turns delta markers on and off.
If you set the suffix at DELTamarker to 1, or use no suffix, the R&S Spectrum Rider
interprets this as delta marker 2 because the first marker has to be a normal marker. If
more than one normal marker (2 to 6) is already active, the command turns these
markers into delta markers. If no delta marker is active yet, the command activates the
delta marker and positions it on the trace maximum.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
DELTamarker selects the deltamarker.
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
