Remote Commands
R&S
®
Spectrum Rider FPH
339
User Manual 1321.1011.02 ─ 11
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
CALC:DELT3 ON
Turns on delta marker 3 or turn marker 3 into a delta marker.
CALCulate<1...2>:DELTamarker<1...6>:AOFF
This command turns off all active delta markers.
This command is an event and therefore has no query and no *RST value.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
DELTamarker selects the deltamarker.
Example:
CALC:DELT:AOFF
Turns off all delta markers.
Usage:
Event
CALCulate<1...2>:DELTamarker<1...6>:MAXimum[:PEAK]
This command positions a delta marker on the current trace maximum.
If necessary, the corresponding delta marker is activated first.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
DELTamarker selects the deltamarker.
Example:
CALC:DELT3:MAX
Moves delta marker 3 to the maximum peak.
Usage:
Event
CALCulate<1...2>:DELTamarker<1...6>:MAXimum:NEXT
This command positions a delta marker on the next smaller trace maximum.
If necessary, the corresponding delta marker is activated first.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
DELTamarker selects the deltamarker.
Example:
CALC:DELT2:MAX:NEXT
Moves delta marker 2 to the next smaller maximum peak.
Usage:
Event
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
