Rogers PRT42, Installation And Programming Manual

Page: 18 / 30

PRT42 and PRT42-BK v1.0 fv72 EN Rev.C
19
Table 4: Connection Terminals
Label Simple
Stand-alone
Operation Mode
Full
Stand-alone
Operation Mode Networked Mode
+12V Supply input plus
GND Supply input minus
CLK Can be configured to
be used as an input
or an output
CLOCK
communication line DATA 0 line for Wiegand formats
CLOCK for Magstripe and RACS formats
DTA Can be configured to
be used as an input
or an output DATA
communication line DATA 1 line for Wiegand formats
DATA for Magstripe and RACS formats
IN1 In stand-alone modes this line functions as
an electric input and it can be configured to
several available functions. In Wiegand and Magstripe formats, the IN1
line activated by shorting it with the
negative lead (–) of power supply. When
IN1 is triggered it turns the OPEN LED to
ON and also activates acoustic signal on the
internal buzzer.
TAMP Tamper switch, NC contacts, 24V/50mA.
Table 5: Ordering Codes
PRT42 RFID/PIN reader, black
PRT42-BK RFID reader, black
PRT42 Grey RFID/PIN reader, light grey
PRT42-BK Grey RFID reader, light grey
RM-2 Relay module. The RM-2 offers two relays with one NO/NC contact
5A/24V rated, relay contacts protected with overvolatge elements.
XM-2 I/O expander module, digital communication with host unit, two inputs
and two relay outputs, each relay output offers one NO/NC contact
5A/24V rated. Relay contacts protected with overvoltage elements.
Table 6: Product History
Hardware Firmware Date Description
PRT42 v1.0 71.00 18/04/05 The initial product version.
PRT42 v1.0 72.00 05/07/05 Error signalization modified.
The symbol of a crossed-through waste bin on wheels means that the product must be
disposed of at a separate collection point. This also applies to the product and all
accessories marked with this symbol. Products labeled as such must not be disposed of with
normal household waste, but should be taken to a collection point for recycling electrical
and electronic equipment. Recycling helps to reduce the consumption of raw materials, thus
protecting the environment.
Contact information:
Roger sp. j.
82-416 Go ś ciszewo
Go ś ciszewo 59
Phone: 055 272 0132
Fax: 055 272 0133
e-mail: biuro@roger.pl