5
Note: For 2 man Iso Sled setups skip to step 5.
Lay Iso Runner Sub Assembly on its side. Line up
holes from the Iso Outrigger with holes on the runner
and use (2) 5/8” x 6” bolts and (2) 5/8” washers to
hold it in place. Then flip runner right side up so
outrigger lays on the ground. Push bolts the rest of
the way through.
Fit second outrigger over the bolts and secure with
(2) more 5/8” washers and (2) 5/8” nuts.
The Lev Ram Unit comes with (3) nuts on the
threaded rod at the end of the spring. Remove (2)
to use later. Install the Lev Ram Unit by inserting it
spring side first into the Lev Head Unit. The
threaded rod on the end of the spring fits through a
hole at the back of the head unit. Use the (2) nuts
you removed earlier to secure the ram in place.
Attach the Surge or Shock pad to the ram unit by
sliding pad over ram and inserting fas-pin.
1 2
3
4
