PRT12MF-DES PRT82MF PRT84MF Operating Manual.doc
2018-08-23
11/23
upon key press
1 - Yes
flash whenever key is pressed.
Input types
IN1
0 – NO
1 – NC
Defines input type.
IN2
0 – NO
1 – NC
Defines input type.
Acoustic signalization
Buzzer loudness level
0..100%
Defines buzzer loudness level. Value 0 switches
buzzer off.
Buzzer control input in
Wiegand mode
0 - None
1 - IN1
2 - IN2
Selects input which will control buzzer in Wiegand
mode.
Short sound after card
read
0 – No
1 – Yes
When option is set buzzer generates short beep
whenever card is read.
Short sound after key
press
0 – No
1 – Yes
When option is set buzzer generates short beep
whenever key is pressed.
Serial card cumber (CSN) settings
Serial number length
(CSNL) [B]
0..16
Defines number of CSN bytes used to form RCN.
Advanced settings
Stop card/PIN reading
when buffer full
0 – No
1 – Yes
When option is active reader stops card/PIN
reading until previous PIN/card is transmitted to
controller.
Clear card/PIN buffer
timeout [s]
0..64
Defines time from the last card/PIN entry till
moment when card/PIN buffer is automatically
erased.
Buffer
overflow
signalisation on LED
SYSTEM
0 - Off
1 - On
When option is active reader will signal on LED
SYSTEM that card/PIN buffer overflow occurred.
Card/PIN encryption
0 - Off
1 - On
When option is active the card/PIN data will be
encrypted when transmitted over RS485.
Programmable card number (PCN) settings for Mifare Classic
Sector type
0 – NONE
1 – SSN
2 – MAD
Specifies the type of sector where PCN number is
stored. If value ‘0’ is chosen then RCN will be
formed from CSN number only.
Format
0 – HEX
1 – HEX ASCII
Specifies coding method of PCN number in data
block.
First byte position
(FBP)
0..15
Specifies position of the byte in data block where
PCN number begins.
Last byte poistion
(LBP)
0..15
Specifies position of the byte in data block where
PCN number ends.
Sector ID
0..39
Data sector where PCN number is stored.
Application ID (AID)
0000 – FFFFF
Specifies AID number (Application Identifier)