MCT82M-IO-HR Operating Manual Rev. D.doc
22.06.2021
4/17
Function key
The terminal is equipped with touch function key. Various functions can be assigned to the key within high
level configuration (VISO) e.g. door bell.
LED indicators
The terminal is equipped with four LED indicators which are mainly used to signal hotel functions but they
can also be programmed with other available functions within high level configuration (VISO).
Table 2. LED indicators
Name
Colour
Function
CALL SERVICE
Green
Requires programming
MAKE UP ROOM
Orange
Requires programming
CALL ASSISTANCE
Blue
Requires programming
DO NOT DISTURB
Red
Requires programming
Fig. 3 Indicators and function key
Note: Synchronic pulsing of all four LEDs signifies lost communication with MC16 controller.
Buzzer
The terminal is equipped with buzzer which is used to signal integral functions and it can be additionally
programmed with other available functions within high level configuration (VISO).
Inputs
The terminal offers 3 general purpose parametric inputs of NO, NC, 3EOL/DW/NO and 3EOL/DW/NC type
and 1 input internally connected to tamper contact. Input types and electric parameters such as response
time and parametric resistors are defined within low level configuration (VISO v2 or RogerVDM). Input
functions are assigned within high level configuration (VISO). Multiple functions can be assigned to the
same input at the same time.
