ROGER GPS Splitter (GPSR-S)
ROGER GPS Signal Splitter is used to distribute GPS signal to several GPS Repeaters.
Splitter works with both GPS L1 and L2 frequency bands. It has one chaining output
and four repeater outputs. DC power is passed from the chaining output to the input
connector for GPS line amplifier and GPS receiving antenna.
If the signal is to be
transmitted to fewer than five repeaters, the unused ports should be terminated.
TECHNICAL SPECIFICATIONS
Size
110*143*28mm
Weight
185 g
Operating temperature
-35 - +85°C
Connectors
TNC female input,
5 x TNC female output:
1 x -4dB with DC pass
4 x -12dB
Frequency range:
1200-1700MHz
Impedance:
50Ω
Power
The splitter is powered though the output / DC input
connector by the ROGER GPS Repeater
Input connector
Output / DC input
Output connector
Output connector
Output connector
Output connector
12.
13.
