Input connector
Output connector
Splitter and Amplifier
Installation instructions
ROGER™ GPS Signal Splitter and Line Amplifier provide longer cable runs and signal
splitting to several ROGER™ GPS Repeaters.
ROGER GPS Amplifier (GPSR-A)
ROGER™ GPS Line Amplifier is an amplifier that is used to allow for longer
cable runs and/or signal splitting to several GPS Repeaters. It has a gain of
+18dB at the GPS L1 frequency band and it includes a filter to remove unwanted
signals that may have entered the cable at somepoint.
The amplifier is powered though the output signal cable by the ROGER GPS Repeater
and also passes on DC power for the GPS receiving antenna or an another
GPS line amplifier.
TECHNICAL SPECIFICATIONS
Size
110*143*28mm
Weight
135 g
Operating temperature
-35 - +85°C
Connectors
TNC female input
TNC female output
Frequency range
1575.42 +/-15MHz filtered
Noise figure
<5dB
Impedance
50Ω
Power supply
The amplifier is powered though the output signal
cable
by the ROGER GPS Repeater
Gain
+15dB
10.
11.
