Roger Technology B70/1B, Instruction And Warnings For The Installer

Page: 48 / 140

EN
48
11
Commands and Accessories
-JRSXMRWXEPPIHWEJIX]HIZMGIW[MXL2'GSRXEGXWQYWXFINYQTIVIHEXXLI'31XIVQMREPWSVHMWEFPIHF]QSHMJ]MRK
the parameters , and in the extended menu.
/)=
2%2SVQEPP]3TIR
2'2SVQEPP]'PSWIH
CONTACT DESCRIPTION
6(SC) 7(COM)
'SRRIGXMSRJSVHSSVSTIRMRHMGEXSVPEQT:HG;
6(SC) 10(COM) Photocell test connection.
8LITS[IVJIIHJSVXLITLSXSGIPPXVERWQMXXIVW8<QE]FIGSRRIGXIHXSXLMW
Set the parameter
$
to enable the test function.
)EGLXMQIEGSQQERHMWVIGIMZIHXLIGSRXVSPYRMXW[MXGLIWXLITLSXSGIPPWSJJERHSRXS
check that the contact changes state correctly.
WARNING! If contact 6-SC is used for the photocell test function, a overhead door open
indicator lamp cannot be connected.
8(LAM) 7(COM)
'SRRIGXMSRJSVƽEWLMRKPMKLX:HGQE\;HYX]G]GPI
8LIWIXXMRKWJSVXLITVIQERSIYZVIƽEWLMRK[EVRMRKWMKREPQE]FIWIPIGXIH[MXLTEVEQ
eter
$ [LMPIXLIƽEWLMRKQSHIMWWIX[MXLTEVEQIXIV
.
9(+24V) 10(COM)
4S[IVJIIHJSVI\XIVREPHIZMGIWQE\;Q%
11(FT1) 10(COM)
-RTYX2'JSVGSRRIGXMRKTLSXSGIPPWƼKERH
8LITLSXSGIPPWEVIGSRƼKYVIHF]HIJEYPX[MXLXLIJSPPS[MRKWIXXMRKW
• . Photocell triggers only during door closure. Photocell is ignored during door
aperture.
• . Movement is reversed if the photocell is triggered during door closure.
• . The door opens when an open command is received if the photocell is
obstructed.
If the photocells are not installed, jumper the terminals 10(COM) - 11(FT1) or set the
parameters and .
WARNING
9WI
R90/F4ES , G90/F4ES or T90/F4S series photocells.
12(COS) 13(COM)
-RTYX2'SVO3LQJSVGSRRIGXMRKWIRWMRKIHKI
8LIWIRWMRKIHKIMWGSRƼKYVIHF]HIJEYPX[MXLXLIJSPPS[MRKWIXXMRKW
•
1SZIQIRXMWVIZIVWIHMJXLIWIRWMRKIHKI2'GSRXEGXMWEGXMZEXIHHYVMRKHSSV
closure.
If the sensing edge is not installed, jumper the terminals 12(COS) - 13(COM) or set the
parameter .
14(ST) 13(COM)
7834GSQQERHMRTYX2'
The current manoeuvre is arrested if the safety contact opens.
N.B.:
XLIGSRXVSPPIVMWWYTTPMIH[MXLXLMWGSRXEGXEPVIEH]NYQTIVIHF]63+)68)',2303+=
15(PP) 13(COM)
7XITQSHIGSQQERHMRTYX23
16(CH) 13(COM)
'PSWIGSQQERHMRTYX23
17(COR) 18(COM)
3YXTYX:HG;JSVGSRRIGXMRK,'36GSYVXIW]PMKLX
N.B.
6IEH][MVIHMRJEGXSV]F]63+)68)',2303+=
20(ES) 19(COM)
3YXTYX:HG;JSVTS[IVMRKIPIGXVMGPSGO
24 25(ANT)
%RXIRREGSRRIGXSVJSVWPSXMRVEHMSVIGIMZIVFSEVH
9WI6+MJERI\XIVREPERXIRREMWYWIHQE\MQYQVIGSQQIRHIHPIRKXLQ
N.B. : do not make joints in cable.
RECEIVER CARD
'SRRIGXSVJSVWPSXMRVEHMSVIGIMZIVFSEVH
The B70/1B control unit has two radio remote control functions by default:
•
46WXITQSHIGSQQERHQSHMƼEFPI[MXLTEVEQIXIV
).
•
46GPSWIGSQQERHQSHMƼEFPI[MXLTEVEQIXIV
).