WM-020-369-10-en
BA SPEEDY classic 2 balance
.doc
STARK Spannsysteme GmbH – Roemergrund 14 - 6830 Rankweil - Austria
Tel.:+43 5522 37400-0 - Fax.:+43 5522 37400-700 - e-mail:
-
www.stark-inc.com
9/16
2x puller screws M8
for the removal of the
fast closing clamp
6.2 Removing the fast closing clamp
You will find all installation data sheets on the SPEEDY
devices on our web site.
h t t p : / / w w w. s ta r k - i n c
. c o m /English/Downloads/index.php
Simply login to
the "Build sizes" page and you will quickly receive your
user name and password by e-mail.
Training courses
Stark Spannsysteme GmbH provides training courses to train
your operators and service personnel. Training courses are held
on site or at Stark Spannsysteme GmbH. Please ask for
information. We will be delighted to advise you.
1. Prior to starting removal, the system
must be completely de-pressurised.
(disconnect power supply to pressure
generator)
2. Undo all 8 M6 DIN912 screws evenly,
then two setscrews DIN913 M6x12
must be screwed into the thread under
the puller threads.
3. Then the fast closing clamp can be
pressed off by evenly screwing in 2x
M8x25 into the puller threads.
4. To remove the clamping element,
make sure the rear is vented,
otherwise a vacuum may occur when
the piston is pulled out.
