RODIA
®
SAFETY
●
TOOL MAINTENANCE.
It is important to keep tools clean and in
good working order. This will result in
optimal performance of the machine.
Always follow the maintenance instructions
for proper tool maintenance.
●
REDUCING ACCIDENTAL STARTING OF
MACHINE
It is important to be sure that the
switch is in the OFF position
before plugging in the machine.
●
EQUIPMENT ACCESSORIES.
It is important that you refer to the owner’s
manual for determining what are the
recommended accessories to use with this
type of equipment. Using accessories that
are not recommended in the owner’s
manual may increase the risk of personal
injury and/or to people that are within
close proximity of the machinery.
●
CHECKING THE EQUIPMENT FOR
DAMAGED PARTS.
It is important to inspect the power tool
before using it to check for damaged
parts. Any part of the machinery that is
damaged should be checked carefully to
determine whether or not it should be
used and whether or not it can function
properly for its intended use.
It is important to check all the moving parts
of the machinery for proper alignment and
/or possible binding. All broken or dama-
ged parts should be properly repaired or
replaced. If these parts are not repaired
or replaced the proper operation of the
machine could be negatively affected.
Damaged bits should be replaced
immediately.
●
NEVER LEAVE A TOOL RUNNING
UNATTENDED – TURN POWER OFF
It is important never to leave a tool running
when not in use. Also never leave the tool
until the drill has come to a complete
stop. It is important to always turn the
power tool OFF when leaving the work
area or when a hole is finished.
PAGE 6
RODIA FB1200W OPERATING MANUAL V10/2007R2
RODIA
®
SAFETY
HAZARD SYMBOLS
●
READ MANUAL CAREFULLY BEFORE USE
Carefully read and understand
this operating manual and the
enclosed safety instructions prior
to using the machine.
●
WEAR SAFETY GEAR
Always wear safety glasses and
hearing protection when
operating the machine
●
DO NOT SPRAY WATER ON TILE DRILL
Avoid direct water spray on
motor and switch housing when
cleaning.
●
TURN OFF DRILL BEFORE PLUGGING IN
It is important to make sure that
the switch is in the OFF position
before plugging in the machine
to prevent accidental starting of
the machine.
●
ELECTRICAL SHOCK
It is important to never touch
electrical components of the
machine while the machi-
ne is in operation.
●
KEEP AWAY FROM MOVING PARTS
It is important to keep hands,
feet, hair and clothing away from
all moving parts to prevent inju-
ry. It is also important to be sure
that covers and guards are al-
ways in their proper position.
If not, serious injury can occur.
RODIA FB1200W OPERATING MANUAL V10/2007R2
PAGE 7
