background image

RODIA

®

 SAFETY

It is extremely important that you read and under-

stand  all  of  the  safety  instructions,  the  operating 

instructions  and  the  maintenance  instructions.  If 

these instructions are not followed, serious injuries 

and/or  death  could  occur  to  you  or  to  others. 

Also, failure to read and follow the enclosed main-

tenance instructions can lead to equipment failure, 

damage to the equipment or reduced lifetime of 

the equipment.

SAFETY MESSAGES:

Safety messages are used to inform the person(s) 

using this equipment of the potential hazards that 

could  lead  to  equipment  damage,  serious  injury 

or  even  death.  The  safety  messages  within  this 

manual will be followed by one of the following 

(3)  three  words  that  identify  the  severity  of  the 

damage.

It is important that all instructions within this manual 

be followed.  If the instructions are not followed 

serious injuries will occur as well as death.

It is important that all instructions within this manual 

be followed.  If the instructions are not followed 

it  is  possible  that  serious  injuries  could  occur  as 

well as death.

It is important that all instructions within this manual 

be  followed.    Failure  to  follow  these  instructions 

can lead to irreparable damage.

DAMAGE PREVENTION AND 

INFORMATION MESSAGES:

A  Damage  Prevention  Message  is  to  inform  the 

user  of  important  information  and/or  instructions 

that  could  lead  to  equipment  or  other  property 

damage  if  not  followed.  Information  Messages 

convey information that pertains to the equipment 

being used.

Each  message  will  be  preceded  by  the  word 

NOTE, as in the example below.

NOTE:

Equipment and/or property damage may result if 

these instructions are not followed.

GENERAL SAFETY PRECAUTIONS 

AND HAZARD SYMBOLS:

In order to prevent injury, the following safety pre-

cautions and symbols should be followed 

at all times!

Safety Precautions:

  REMOVE ADJUSTING TOOLS.

The machine is supplied with some adjusting 

tools for equipment maintenance.  It is important 

that the user of the machine makes sure that all 

tools are removed or in their proper storage area 

before the machine is turned on.

PAGE 4 

   RODIA FB1200W OPERATING MANUAL   V10/2007R2

Summary of Contents for FB1200W













Reviews: