31
MIDI VOLUME LEVEL
The volume level of a MIDI sound can be adjusted for each individual MIDI coupler
piston. The volume level can then be stored on a combination piston. The volume range is
from 0 to 127.
ADJUSTING THE VOLUME LEVEL OF A MIDI SOUND:
1. Hold the SET piston, then press the MIDI coupler piston. The piston flashes.
Release both pistons.
2. Turn the Select Knob clockwise (right) until the cursor moves to the third menu
screen and is positioned in the Level field (“LEVEL”).
Note: This control uses
MIDI Expression (Control Change #1) to set the overall volume of the sound.
3. Rotate the Alpha Dial to select the desired volume level or “OFF”.
4. Press either the flashing MIDI coupler piston or General Cancel to exit.
Note: A
MIDI Save may be performed to save this setting as the default. Please refer to the
“MIDI Save” section.
INTERNAL/EXTERNAL MIDI SOUND MODULES
The internal MIDI sound module can be turned off when the Theatre 360 is used with an
external MIDI sound module. Each MIDI coupler piston channel can be individually assigned
to either internal/external or external only.
TURNING OFF THE INTERNAL MIDI SOUND MODULE:
1. Hold the SET piston, then press the MIDI coupler piston. The piston flashes.
Release both pistons.
2. Turn the Select Knob clockwise (right). The cursor will move to the
internal/external field.
3. Rotate the Alpha Dial until “EXT” appears.
4. Press either the flashing MIDI coupler piston or General Cancel to exit.
Note: A
MIDI Save may be performed to save this setting as the default. Please refer to the
“MIDI Save” section.
MIDI CHANNEL ASSIGNMENT
Using the Theatre 360 as a MIDI keyboard controller for sequencing may require channel
assignment of the MIDI ACCOMP A coupler piston. All other MIDI coupler pistons transmit
on fixed channels. To reset the transmit channel of MIDI ACCOMP A, perform the following
procedure.
ASSIGNING MIDI CHANNELS:
1. Hold the SET piston, then press MIDI ACCOMP A. The coupler piston flashes.
