Rodgers 790C, Owner'S Manual

Page: 31 / 38

23
COMBINATION MEMORY SETTINGS
The Rodgers 790C is shipped from the factory with default settings on combination memory 1.
Registrations on M1 are locked. M2, M3, and M4 are available for new settings. If settings in
M2, M3, or M4 combination memory must be deleted, this can be accomplished with the
following procedure.
Deleting Combination Settings
1. Press and hold the memory select piston M2, M3, or M4 for approximately five seconds. The
display shows UNLOCKED.
2. While holding the memory piston, press and hold the set piston an additional five seconds.
The display reads MEMORY n FACTORY DEFAULT.
3. Release both pistons.
Each combination memory must be deleted separately.