Rodgers 790C, Owner'S Manual

Page: 11 / 38

3
To move to a new menu or to another setting in the same menu in the console display, press and
hold SET and turn the Select knob. Note: Once any menu other than the Transposer menu is
selected, it is no longer necessary to hold SET to select further menus.
The blinking square in the console display, called the cursor, indicates the setting that is
currently selected. Rotating the Alpha dial changes the value of any selected setting.
There are three different menus. The user menu accesses Voice Palette and auxiliary settings.
This menu is accessed by pressing and holding SET and turning the Select knob
counterclockwise (left) from the Transposer menu.
The second menu controls MIDI settings and is accessed by holding SET and turning the Select
knob clockwise (right) from the Transposer menu.
The third menu also accesses organ and audio settings, but it is only available when headphones
are used.
Note: See the Stereo Headphone Jack section on page 10.
Press General Cancel to return to the Transposer display.
Combination Action with Four Memory Levels
The Rodgers 790C features a combination action easily changed by the organist from the
console. The organist can pre-select registrations and make rapid changes in tone color using
this advanced system.
Rodgers’ microprocessor combination action is a specially refined four-memory system. This
effectively multiplies the number of physical pistons on the console by four.
The 10 General pistons simultaneously affect all stops and controls on the Great, Swell and
Pedal. All manual and pedal registrations may be changed by pressing a General piston. See
Figure 2.
There are five Divisional pistons for each manual division. The Great and Swell Divisionals are
operated by pistons located under each respective manual. The Divisional pistons independently
affect all stops and MIDI controls on the Great, Swell or Pedal. Each division registration may
be changed independently by pressing a Divisional piston.