Rodgers 790C, Owner'S Manual

Page: 19 / 38

11
Adjusting Auxiliary Inputs
1. Press and hold the SET piston.
2. Turn the Select knob counterclockwise (left) to AUX, and place the cursor on the top line.
3. Release SET.
4. Rotate the Alpha dial to select the desired control.
5. Turn the Select knob clockwise (right) to place the cursor on the bottom line.
6. Rotate the Alpha dial to obtain the desired effect.
Stereo Line Outputs
The Rodgers 790C is equipped with stereo line outputs also located on the connector panel.
When using these outputs the divisions of the organ (Great, Swell, and Pedal) are heard in stereo.
There is no specific channel assignment (left or right) given to these divisions.
Pipes Off/Ancillary On
If the Rodgers 790C is equipped with pipe ranks, certain stops control pipe voices and other
stops control digitally sampled voices. There are two pistons affecting the pipe stops of all
divisions simultaneously: ANC ON and PIPES OFF.
When the ANC ON piston is engaged, electronic voices play from the pipe stops. When the
PIPES OFF piston is engaged, the real wind blown pipes turn off.
Note: If the PIPES OFF piston is engaged, the ANC ON piston must also be engaged for the
stop(s) to sound.
Automatic Shutdown Timer
When the organ is on and left unattended, the power automatically turns off after two hours.
Operating any key, stop, or control resets the timer for another two hours. Playing the organ from
a remote MIDI keyboard or sequence also resets the timer.