RODEC
MIXBOX
4
10)
Channel faders
Volume control for input-channel 1 and 2.
11)
Input level potentiometer
Mike level for accurate adjustment for different types of microphones.
12)
Equalizer
Triple tone control for DJ microphone.
13)
DJ mic switch
Switch to turn DJ mic on or off.
14)
Master output potentiometers
Volume controls final output of mixer towards slave- or integrated amplifiers.
15)
Crossfader
With this fader you can easily fade between the input-channels 1 and 2. When the knob is
pushed completely to the left, the signal of channel 1 will appear on the output. When the knob
is pushed completely to the right, the signal of channel 2 will appear on the output.
16)
Flash button
With this pushbutton it is easy to add the signal of the channel that is not selected by the
crossfader.
17)
Crossfader switch
With this switch it is possible to toggle the crossfader between on or off.
CONNECTIONS
A)
PHONO input Channel 1
Phono input with a sensitivity of 2.3mV and build in RIAA correction.
B)
Line
input Channel 1
Line input of channel 1 with a sensitivity of 220mV. To connect different apparatuses such as
a tuner, tape recorder, mini disc, cassette recorder, video recorder, etc..
C)
PHONO input Channel 2
Phono input with a sensitivity of 2.3mV and build in RIAA correction.
D)
Line
inputs Channel 2
Line input of channel 2 with a sensitivity of 220mV. To connect different apparatuses such as
a tuner, tape recorder, mini disc, cassette recorder, video recorder, etc..
E)
Ground
If the recordplayer has a ground wire, connect it to this ground terminal.
F)
DJ micro input
Microphone input with a sensivity of 4.0mV.
G)
Auxiliary output
Output to connect cassette recorder or a (HIFI) video recorder to make recordings. Or to
connect the miXboX to an input of another mixer or pre-amplifier.
H)
Master outputs 1 and 2
Assymetrical outputs to connect power-amplifiers. The output level can be respectively
manipulated with the master potentiometers 1 and 2 (14) from 0 to maximum (775mV).