RODEC
4
headphones. When turned completely to the right, the mix-signal appears on the headphones.
In between it results in a mix of the PFL-signal and the mix-signal.
8)
PFL switches
With these switches you can select the different input sources that you will listen to with the
headphones.
9)
Input selector
This switch is used to select the input signal: LINE or PHONO on channel 1,2 and 3, LINE or
LINE B on channel 4 and LINE/FX-RETURN or MICRO on channel 5.
10)
Level adjuster
These controls are used to adjust input levels of the different inputs.
11)
Equalizer controls
This is used to regulate the degree of treble, middle and bass in the sound.
12)
Aux-send switch
This switch is used to add the signal of that channel to the Aux-send bus. This can be used to
lead the signal to effect-units or monitors via the Aux-send output. It is possible to chose
between Pre- or post-fader via jumpers inside the mixer.
13)
Routing selector
With this selector the signal can be lead: 1) directely to the mix (ouput) or 2) to the left side of
the crossfader or 3) to the right side of the crossfader.
14)
Channel faders
Volume control for every input.
15)
Talk-over control
Variable stage gain control level music suppression. Works only when the Routing-selector
(13) of channel 5 stands on the MIX-position
16)
Aux/FX-send control
Volume control towards effect-units or monitor amplifers
17)
Crossfader
With this fader you can easily fade over between the channels with routing-selector (13) on X-
position and the channels with routing-selector (13) on Y-position. When the knob stands
completely to the left, the signal of the channels with Routing selector (13) on X will appear on
the output. When the knob stands completely to the right, the signal of the channels with
Routing selector (13) on Y will appear on the output.
18)
Master output faders
Volume controls final output of mixer towards slave or integrated amplifers.
CONNECTIONS
A)
PHONO input
Phono input with a sensitivity of 2.3mV and build in RIAA correction.
B)
Ground
If the recordplayer has a ground wire, connect it to the ground terminal.
C)
LINE/LINE B input
Input with a sensitivity of 220mV. To connect different apparatuses such as a CD-player,
tuner, tape recorder, mini disc, cassette recorder or (HIFI) video recorder.
