- 7 -
• After use the NT55 should be removed from its
stand mount, wiped with a dry, soft cloth and
placed in its protective case with the supplied
moisture-absorbent crystals.
• Be sure to place the moisture-absorbent crystals
(supplied) at the head of the microphone(s), so as
to absorb any moisture present.
Eventually this pack of crystals will need to be
dried. This is indicated by the crystals turning pink
in colour.
They can easily be re-used by placing them in an
oven at 100 - 150 degrees celsius for approximately
ten minutes. The crystals will operate effectively
again once they have turned blue.
Storage
Powering the NT55
• For optimum performance the NT55 requires a
“P48” phantom power supply (48 Volt DC).
• Most professional mixing consoles have an internal
48 V supply; alternatively you can purchase a
separate supply. Ensure that the power supply you
use is a professional unit that is operating correctly.
• Damage resulting from the connection of the NT55
to a faulty power supply is not covered by the
warranty.