background image

- 2 -

Introduction

Thank you for investing in the 

 NT55 studio 

condenser microphone.

Whether you’ve purchased this mic on its own, or as a 
part of a matched pair set, I’m confi dent that you will 
fi nd the NT55 is a masterpiece of small-diaphragm 
cardioid-condenser microphone design.

Although clearly relevant to instrument miking, the 
NT55  is  extremely  well  suited  to  situations  where  a 
small ‘unobtrusive’ yet powerful microphone system is 
required.

The NT55 utilises the 1/2” (externally biased) gold 
sputtered true condenser transducer used in the 
internationally renowned RØDE NT5. The NT55, is a 
state-of-the-art low noise balanced output microphone, 
exhibiting a wide dynamic range and full frequency 
response.

The NT55 circuit incorporates a three position variable 
PAD with 0, -10 or 20dB attenuation, and a three position 
variable high-pass fi lter that enables you to step from a 
fl at response to 75 or 150 Hz high pass fi lter.

The NT55 is intended for fi lm, television, broadcast, 
live performance, theatre, surround and environmental 
recording applications or wherever your imagination 
takes you.

The NT55 comes with two different condenser 
microphone heads to provide a wide variety of polar 
patterns.

Please  take  the  time  to  visit 

www.rodemic.com

 and 

register your microphone for a full ten year warranty.

While there you can view studio tips and techniques, as 
well as browse the comprehensive range of accessories 
for the NT55 and other 

 microphones.

Peter Freedman

 Microphones

Sydney, Australia

Summary of Contents for NT55









Reviews: