ROCSECURE – Rocserve 4RMe Secure Raid System
User Manual
Page |
75
Clear Event Buffer
Use this feature to clear the Rocserve 4RMe’s System Events Information buffer.
Modify Password
To change or disable the Rocserve 4RMe’s admin password; click on the Change Password
link under the System Controls menu; the Modify System Password screen appears.
The factory-default admin password is set to
00000000
. Once the password has been set, the
user or administrator can only monitor and configure the Rocserve 4RMe by providing the
correct password.
The password is used to protect the Rocserve 4RMe’s configuration from unauthorized
access. The RAID controller will check the password only when entering the Main Menu
from the initial screen. The Rocserve 4RMe will automatically go back to the initial
screen when it does not receive any command after sometime.
To disable the password, enter only the original password in the
Enter Original Password
box; leave both the
Enter New Password
and
Re-Enter New Password
boxes blank. After
selecting the
Confirm the Operation
option and clicking the
Submit
button, the system
password checking will be disabled. No password checking will occur when entering the
main menu from the starting screen.
All manuals and user guides at all-guides.com