Wall Mounting the Enclosure
Rocstor recommends the cabinet enclosure installation to be performed by professional or qualified
technician. Plan for the installation and make sure there are no equipment installed in the cabinet
during installation. Prior wall mounting and rack installation, first use a tape measure and precisely
mark the position of the rack. Then use a level and make sure the rack will be installed in the straight
position. Use correct fasteners which are not included and place the rack and secure the cabinet to the
wall. Your installer or technician must use the correct mounting equipment for installation of the rack
to cinder block, concrete, drywall or wood studs.
Warning: Make sure you follow the installation manual carefully. Failure to incorrectly installing the
cabinet, it will cause bodily injury, cabinet, and property damages. Make sure the supporting surface
can safely handle the combined load of the equipment and attached
1- Make sure the mounting plate hooks are facing outward
and away from the wall when mounting the plate to the
wall. Attach the mounting plate to the wall with hardware
(not included). The installation plate mounting hole is
designed to accommodate an M8 or 5/16” bolt. The holes
on the plate are spaced 16" apart to accommodate
standard stud.
2- After the plate has been securely positioned and
installed, hang the cabinet’s two mounting notches onto the
two mounting hooks on the attached wall plate. Slide down
the cabinet notches onto the hooks. The cabinet should easily
slide down and mount on the plate. The enclosure can be
mounted in standard or reversed positions.
3- Use the (3) supplied screws to secure the cabinet.
Tighten the screws in the holes on the mounting hooks
after the mounting plate has been installed and the cabinet
has been securely hung.
3
16”
16”
1
2
3
Install the appropriate hardware (not included) to the wall. Follow all local
regulations. Refrain from mounting the enclosure cabinet to the wall with
equipment in the cabinet.
WARNING
Page
12
A
A
B
B