Enclosure Configuration
Rail Adjustment
WARNING: Adjusting the rails while the rails are connected to the equipment will damage your equip-
mentand the enclosure. Do not adjust the rails when there is equipment installed in the cabinet. Also,
make sure there are (2) two screws used per raid for properly secured equipment installation.
Do not attempt to adjust the rails since it will accommodate for different mounting depth unless your
equipment specification requires for a different mounting depth. This versatile rack provides adjustment for
front and rear set of of rails. They rails are independently adjustable in a ¼ inch (6mm) increments.
1- The SolidRack enclosure includes an upper and lower rail.
The upper and lower rails are connected with (2) two screws and
(2) cage nuts. One set in the upper conner and additionally
another set in the lower corner. Please use a Phillips-head
screwdriver for removing the screws that have attached the rails
to the cabinet enclosure.
2- Adjust and install the cage nuts to the required depth.
3- Place and slide the rails to the required depth. Install the
mounting rails and use the screws that was removed originally.
2
3
Page
11
1
