NAS System
22
User’s Manual
NOTE: All the disk tray holes are labelled accordingly.
e.
Slide the tray into a slot.
f.
Press the lever in until you hear the latch click into place. The Status LED will
turn green when the subsystem is powered on and HDD is good.
2.6 Preparing the System
1.
Attach network cable to Ethernet port LAN0. Connect the other end to your
network switch. You may also connect the other Ethernet LAN port if needed.
2.
Connect monitor to the VGA port.
3.
Connect USB keyboard and mouse or
Connect PS/2 keyboard and mouse to the USB-to-PS/2 converter cable, and then
connect the USB connector to the USB port on the Server.
Tray Hole W
