Rocstor Enteroc N1823 Hardware Manual Download Page 18 | Manualshive

Page: 18 / 29

Rocstor Enteroc N1823 Hardware Manual Download Page 18

NAS System

18

User’s Manual

Every Drive Carrier has 2 status indicator lights. The status indicator light is used for
Power On/Error. When this light is

GREEN

the power is on and everything is

functioning normally. When the Power On/Error light is

RED

, then an error has occur

that requires the user’s attention.

The activity indicator light is the hard disk drive access light. When the hard disk
drive is being accessed, this light will flash

BLUE

.

In addition, both indicator lights are viewable within a 170° arc.

2.5 Installing Hard Drives

This section describes the physical locations of the hard drives supported by the
subsystem and gives instructions on installing a hard drive. The subsystem supports
hot-swapping allowing you to install or replace a hard drive while the subsystem is
running.

2.5.1 Installing 3.5” Disk in a Disk Tray

a.

Press the Tray Open button and the Disk Tray handle will flip open.

Activity Indicator

Status Indicator

Tray

Open

Button

«
...
16
17
18
19
20
...
»

Summary of Contents for Enteroc N1823






























Reviews:

No comments