11
3)
Insert one end of the USB or IEEE 1394(b) connector
into a corresponding port on the enclosure.
4)
Insert the USB or IEEE 1394(b) connector into an
available port on the computer.
Note:
If the LED indicator is red, security is not enabled.
Ensure that the secure key is inserted before power on,
and the enclosure is properly connected.
Using the USB Y-cable:
The USB Y-cable provides 2 USB type-A connectors and
1 USB mini-B connector. The 2 USB type-A connectors
are inserted into two available USB ports on the
computer. The USB Y-cable serves as both power supply
and data transfer cable. The cable with square type-A
connector supplies power and transfers data between the
enclosure and the host computer. The remaining type-A
12
connector provides additional power from the host
computer to the enclosure. The remaining USB mini-B
connector is inserted into the port on the rear panel of
the enclosure.
square type-A connector of the USB Y-cable into the host.
This will enable data transfer between the enclosure and
the computer. The remaining USB type-A connector will
be idle.
Do
NOT
insert the remaining type-A connector into the
host.
